Uniformity of utilization distribution of the teeth of the cutter

Authors

  • Bogdan Sovilj University of Novi Sad, Faculty of Technical Sciences, Departman for Production Engineering, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia
  • Ratko Mitrović University of Novi Sad, Faculty of Technical Sciences, Departman for Production Engineering, Trg Dositeja Obradovica 6, 21000 Novi Sad, Serbia

DOI:

https://doi.org/10.24867/JPE-1984-01-145

Keywords:

taper cutter, production conditions, wear of the teeth

Abstract

In the work, the uniformity of wear of the teeth of the taper cutter and the optimal size of the axial movement of the taper cutter and the production conditions were determined. By applying the optimal displacement, the stability of the tool is increased, which leads to a reduction in tool costs and wear costs.

Downloads

Published

1984-12-12

Issue

Vol. 1, No. 1 (1984) (Former "Proceedings of the Institute of Production Engineering")

Section

Original Research Article

License

Copyright (c) 2023 Journal of Production Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Uniformity of utilization distribution of the teeth of the cutter. (1984). Journal of Production Engineering, 1(1), 145-158. https://doi.org/10.24867/JPE-1984-01-145