Preliminary study on the cutting force and shape error in turning of X5CrNi18-10 shafts with small feed
Published 2024-12-20
abstract views: 28 // FULL TEXT ARTICLE (PDF): 0
Keywords
- cutting force,
- Cylindricity,
- design of experiments,
- longitudinal turning,
- shape accuracy
How to Cite
Copyright (c) 2024 Journal of Production Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
Abstract
Measuring cutting forces and shape errors is crucial for understanding and optimizing machining processes. These factors significantly describe the quality, accuracy, and efficiency of manufacturing operations. In this study, the focus is on the turning of X5CrNi18-10, a widely used austenitic stainless steel known for its excellent corrosion resistance and mechanical properties, but challenging machinability due to work-hardening tendencies and high toughness. The study investigates the effects of three key machining parameters—feed rate, depth of cut, and cutting speed—on cutting forces and shape errors, particularly cylindricity. Cutting forces directly impact tool wear, energy consumption, and surface finish, while shape errors reflect the geometric deviations from the intended design, affecting the functionality of machined components. By analyzing these parameters, the study aims to provide insights into the interactions between cutting dynamics and material behavior during turning. It evaluates how variations in feed, depth of cut, and cutting speed influence the magnitude of cutting forces and the resulting geometric precision. These findings contribute to the development of optimized machining strategies, ensuring improved dimensional accuracy, reduced tool wear, and enhanced overall process stability for X5CrNi18-10 and similar materials.
Dimensions Citation Metrics
References
- Juneja, B. L. (2003). Fundamentals of metal cutting and machine tools. New Age International.
- Ramesh, R., Mannan, M. A., & Poo, A. N. (2000). Error compensation in machine tools—a review: part I: geometric, cutting-force induced and fixture-dependent errors. International Journal of Machine Tools and Manufacture, vol. 40, no. 9, p. 1235–1256. DOI: 10.1016/S0890-6955(00)00009-2.
- Ee, K., Balaji, A., Li, P., & Jawahir, I. (2001). Force decomposition model for tool-wear in turning with grooved cutting tools. Wear, vol. 249, no. 10–11, p. 985–994. DOI: 10.1016/s0043-1648(01)00837-7.
- Kundrák, J., Markopoulos, A. P., Makkai, T., & Karkalos, N. E. (2019). Effect of edge geometry on cutting forces in face milling with different feed rates. Manufacturing Technology, vol. 19, no. 6, p. 984–992. DOI: 10.21062/ujep/407.2019/a/1213-2489/mt/19/6/984.
- Astakhov, V. P. (2004). The assessment of cutting tool wear. International Journal of Machine Tools and Manufacture, vol. 44, no. 6, p. 637–647. DOI: 10.1016/j.ijmachtools.2003.11.006.
- Ezugwu, E. (2005). Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture, vol. 45, no. 12–13, p. 1353–1367. DOI: 10.1016/j.ijmachtools.2005.02.003.
- Li, X., Liu, X., Yue, C., Liang, S. Y., & Wang, L. (2022). Systematic review on tool breakage monitoring techniques in machining operations. International Journal of Machine Tools and Manufacture, vol. 176, p. 103882. DOI: 10.1016/j.ijmachtools.2022.103882.
- Karpuschewski, B., Kundrák, J., Varga, G., Deszpoth, I., & Borysenko, D. (2018). Determination of specific cutting force components and exponents when applying high feed rates. Procedia CIRP, vol. 77, p. 30–33. DOI: 10.1016/j.procir.2018.08.199.
- Smith, G. T. (2002). Roundness and cylindricity. In Industrial Metrology, p. 135–184. DOI: 10.1007/978-1-4471-3814-3_4.
- Liu, Q., Zhang, C., & Wang, H. B. (1997). Form-accuracy analysis and prediction in computer-integrated manufacturing. International Journal of Machine Tools and Manufacture, vol. 37, no. 3, p. 237–248. DOI: 10.1016/s0890-6955(96)00068-5.
- Singaravel, B., Marulaswami, C., & Selvaraj, T. (2016). Analysis of the effect of process parameters for circularity and cylindricity errors in turning process. Applied Mechanics and Materials, vol. 852, p. 255–259. DOI: 10.4028/www.scientific.net/amm.852.255.
- Weihua, N., & Zhenqiang, Y. (2012). Cylindricity modeling and tolerance analysis for cylindrical components. The International Journal of Advanced Manufacturing Technology, vol. 64, no. 5–8, p. 867–874. DOI: 10.1007/s00170-012-4078-3.
- Cho, N., & Tu, J. (2002). Quantitative circularity tolerance analysis and design for 2D precision assemblies. International Journal of Machine Tools and Manufacture, vol. 42, no. 13, p. 1391–1401. DOI: 10.1016/s0890-6955(02)00080-9.
- Sun, X., Yao, P., Qu, S., Yu, S., Zhang, X., Wang, W., Huang, C., & Chu, D. (2022). Material properties and machining characteristics under high strain rate in ultra-precision and ultra-high-speed machining process: a review. The International Journal of Advanced Manufacturing Technology, vol. 120, no. 11–12, p. 7011–7042. DOI: 10.1007/s00170-022-09111-5.
- Agarwal, A., & Desai, K. (2020). Predictive framework for cutting force induced cylindricity error estimation in end milling of thin-walled components. Precision Engineering, vol. 66, p. 209–219. DOI: 10.1016/j.precisioneng.2020.07.007.
- Abas, M., Salah, B., Khalid, Q. S., Hussain, I., Babar, A. R., Nawaz, R., Khan, R., & Saleem, W. (2020a). Experimental investigation and statistical evaluation of optimized cutting process parameters and cutting conditions to minimize cutting forces and shape deviations in AL6026-T9. Materials, vol. 13, no. 19, p. 4327. DOI: 10.3390/ma13194327.
- Ryu, S. H., Lee, H. S., & Chu, C. N. (2003). The form error prediction in side wall machining considering tool deflection. International Journal of Machine Tools and Manufacture, vol. 43, no. 14, p. 1405–1411. DOI: 10.1016/s0890-6955(03)00183-4.
- Benardos, P., Mosialos, S., & Vosniakos, G. (2006). Prediction of workpiece elastic deflections under cutting forces in turning. Robotics and Computer-Integrated Manufacturing, vol. 22, no. 5–6, p. 505–514. DOI: 10.1016/j.rcim.2005.12.009.
- Zhao, Z., Wang, S., Wang, Z., Wang, S., Ma, C., & Yang, B. (2020). Surface roughness stabilization method based on digital twin-driven machining parameters self-adaption adjustment: a case study in five-axis machining. Journal of Intelligent Manufacturing, vol. 33, no. 4, p. 943–952. DOI: 10.1007/s10845-020-01698-4.
- Zhang, Z., Yang, Y., Li, G., Qi, Y., Yue, C., Hu, Y., & Li, Y. (2022). Machining accuracy reliability evaluation of CNC machine tools based on the milling stability optimization. The International Journal of Advanced Manufacturing Technology, vol. 124, no. 11–12, p. 4057–4074. DOI: 10.1007/s00170-022-08832-x.
- Walczak, M., Szala, M., & Okuniewski, W. (2022). Assessment of corrosion resistance and hardness of shot peened X5CRNI18-10 steel. Materials, vol. 15, no. 24, p. 9000. DOI: 10.3390/ma15249000.
- Patel, U. S., Rawal, S. K., Arif, A., & Veldhuis, S. C. (2020). Influence of secondary carbides on microstructure, wear mechanism, and tool performance for different cermet grades during high-speed dry finish turning of AISI 304 stainless steel. Wear, vol. 452–453, p. 203285. DOI: 10.1016/j.wear.2020.203285.
- Pálmai, Z., Kundrák, J., Felhő, C., & Makkai, T. (2024). Investigation of the transient change of the cutting force during the milling of C45 and X5CrNi18-10 steel taking into account the dynamics of the electro-mechanical measuring system. The International Journal of Advanced Manufacturing Technology, vol. 133, no. 1–2, p. 163–182. DOI: 10.1007/s00170-024-13640-6.
- França, P. H., Barbosa, L. M., Fernandes, G. H., Machado, Á. R., Martins, P. S., & Da Silva, M. B. (2024). Internally cooled tools: an eco-friendly approach to wear reduction in AISI 304 stainless steel machining. Wear, vol. 554–555, p. 205490. DOI: 10.1016/j.wear.2024.205490.
- Taylor Hobson (2011). Exploring Roundness - A fundamental guide to the measurement of cylindrical form. Taylor Hobson Limited, Leicester, England, p. 100.